Bambu Lab X1C, equipped with extra cooling and a hardened nozzle and drive gear, unlocks a wider selection of materials, including PA,
PC, PET, and TPU, and specializes in carbon fiber and glass fiber reinforced polymers.
Colors & Beyond
With Bambu Lab Automatic Material System (AMS)，you can now enjoy printing freely in multiple colors and materials.
Vibration Compensation & Extrusion Compensation
The active vibration compensation (XY) algorithm and extrusion compensation guarantees extra smoothness and gets you good prints.
AI-Powered Evolution
Dual Auto Bed Leveling
Dual Auto Bed Leveling system checks for increased reliability.The lidar and analog force sensors crosscheck for an extra layer of
redundancy in bed leveling.
Al inspected first layer
Tired of waiting out that first layer? The lidar sensor can check your first layer so that you can get back to doing...anything else..
Spaghetti detection
Our Al keeps an eye out for Spaghetti monsters, so you can sleep easy in the knowledge that your printer is safe from this scourge.
Full advanced features of X1C 3D printers: Learn
more
X1C Tech Specs
Build
Volume (W×D×H)
256 × 256 × 256 mm³*
Nozzle
0.4 mm Hardened Steel Included
Hotend
All-Metal
Max
Hot End Temperature
300 ℃
Filament
Diameter
1.75 mm
Supported
Filament
PLA, PETG, TPU, ABS, ASA, PVA, PET Ideal
for PA, PC, Carbon/ Glass Fiber Reinforced Polymer
Build
Plate Surface
Bambu Textured PEI Plate or Bambu
Cool Plate (Pre-installed,
Random, Both compatible with Micro Lidar)
*To
prevent heatbed damage caused by collisions with foreign objects, the default printable height in Bambu Studio is set to 250mm. If
you need to utilize the remaining 6mm of printable height, please refer to the safety instructions in this WIKI
article .
*The
collapsible filament cutter stopper will occupy part of the printing area when popped out. If you need to use the entire printing
area, please follow the instructions in this WIKI
article.
*To prevent heatbed damage caused by collisions with foreign objects, the default
printable height in Bambu Studio is set to 250mm. If you need to utilize the remaining 6mm of printable height, please refer to the
safety instructions in this WIKI
article .
*The collapsible filament cutter stopper will occupy part of the printing area when popped
out. If you need to use the entire printing area, please follow the instructions in this WIKI
article.
How to get started
Follow
the Quick Start Guide or
watch the unboxing video below to enjoy out-of-the-box 3D printing in minutes.
What's in the box
Bambu Lab X1C
1x Build Plate (Pre-installed, Random, Both compatible with Micro Lidar)
