PLA Sparkle

Bambu PLA Sparkle

Bambu PLA Sparkle is a next-level aesthetic filament that combines strength and sparkle. With metal particles included in its composition, Bambu PLA Sparkle adds a special sparkling look to your prints that sets them apart from the rest.

However, it is not recommended to use a 0.2 mm nozzle for printing as clogging may occur. Take your 3D printing projects to new heights with Bambu PLA Sparkle!

Accessory Compatibility

	Recommended	Not Recommended
Build Plate	Cool Plate, High Temperature Plate or Textured PEI Plate	Engineering Plate
Hotend	Hardened Steel Nozzle 0.4 / 0.6 / 0.8 mm) Stainless Steel Nozzle (0.4 mm)	Stainless Steel Nozzle (0.2 mm)
Glue	Bambu Liquid Glue Glue Stick	/

PLA Sparkle Hex Code Table

Color	Hex Code	Display
Slate Gray Sparkle	#8E9089
Crimson Red Sparkle	#792B36
Royal Purple Sparkle	#483D8B
Alpine Green Sparkle	#3F5443
Onyx Black Sparkle	#2D2B28

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing Settings
Drying Settings (Blast Drying Oven)	55 °C, 8 h
Printing and Keeping Container's Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	190 - 230 °C
Bed Temperature (with Glue)	35 - 45 °C
Printing Speed	< 250 mm/s

Physical Properties
Density	1.26 g/cm³
Vicar Softening Temperature	57 °C
Heat Deflection Temperature	55 °C
Melting Temperature	156 °C
Melt Index	34.2 ± 3.3 g/10 min

Mechanical Properties
Tensile Strength	33 ± 3 MPa
Breaking Elongation Rate	11.7 ± 0.7 %
Bending Modulus	2310 ± 140 MPa
Bending Strength	63 ± 4 MPa
Impact Strength	66.5 ± 3.6 kJ/m²

Downloads

Filament TDS

Filament MSDS

Filament RoHS

Printing Tips

• Drying PLA Sparkle is optional. Recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, and 75 ℃ for 12 hours on printer's heatbed. For more details please refer to: Filament drying cover on WIKI.